SKB Shotguns
trap

Specifications and inventory status:


Model Option
Over & Under Fixed Comb
Over & Under Adjustable Comb High Grade Wood
Unsingle Fixed Comb High Grade Wood
Unsingle Adjustable Comb High Grade Wood
Combo Adjustable Comb High Grade Wood
Combo Adjustable Comb with Reduced length of pull

(To view click on the above selections)






Specifications and inventory status:

Model Option
Over & Under Fixed Comb
Over & Under Adjustable Comb High Grade Wood
Unsingle Fixed Comb High Grade Wood
Unsingle Adjustable Comb High Grade Wood
Combo Fixed Comb
Combo Adjustable Comb High Grade Wood
Combo Adjustable Comb with Reduced length of pull

(To view click on the above selections)

85TSS Press Release


Note: Shotguns may only be ordered by a dealer with a valid Federal Firearms License and not be ordered online.



 

The 85 Target Super Sport (85TSS) Trap Models feature the factory performance tuning which includes oversized bore diameters, and lengthened forcing cones to reduce recoil and deformation of shot pellets.  The sighting plane on the 85TSS Trap model is a 12mm wide, step up ventilated rib equipped with a nickel center post and a Hi Viz Comp front sight.  The 85TSS's are equipped with the Briley competition series choke tubes.

The performance tuned 85TSS Trap Over & Under, Trap Un-single and Un-single Trap Combo is available in a total of 26 variations.  The specifications for each model are shown in the charts. You can link to these tables at the top of this page.

The new 85TSS Un-single barrel is equipped with an adjustable rib that allows you to change the point of impact to match your style of shooting.  The rib can be adjusted without special tools.

Simply loosen one slotted screw with the choke tube wrench, then rotate the small knurled wheel in the muzzle support block to move the point of impact either up or down.  Then retighten the slotted screw. From the factory, the Un-single is set to shoot approximately 65/35 or approximately 4" above the point of aim.  The point of impact can be adjusted from 50/50  to  90/10 by simply rotating the wheel to change the angle of the rib.

The unsingle barrel is equipped with an aluminum adjustable rib. 
The point of impact can be adjusted from 50/50 to 90/10
by rotating a small knurled wheel located in the muzzle support block.

 

 

 

All Trap barrels are fitted with a 12 mm ventilated step rib.  The surface of the rib has five center channel grooves bordered by  two raised matte surfaces.

 



 

 

CTS hardware consists of 6061-T6 aluminum base plates and comb bushings, hardened A-2 tool steel support posts and stainless steel fasteners.  The base plates are etched with 1/16" indicating lines for offset (left & right) adjustment of the comb.  The comb height is adjusted by sliding 1/16" vinyl washers over the support post.  The comb has a maximum adjustment range of ½" laterally and ½" vertically.



 

 

The 85TSS barrel group (12 ga) is available with "Pigeon Porting" by Mag-Na-Port International.  This porting process is accomplished by Electrical Discharge Machining (EDM), ensuring smooth incisions of exact dimensions.  The "Pigeon Porting" pattern reduces perceived recoil by 15% to 20%, and muzzle lift by 60% to 80% in 12 gauge models.



litepipe  

 

The 85TSS barrel group has been fitted with a nickel center post and the HI-VIZ CompSight system.  This sight allows the shooter to select the specific size and color Litepipe to meet the individual's ocular variation and lighting conditions of the event.  The Litepipe is an optical-quality plastic, injection molded to precise dimension and color.  A specific Litepipe kit has been selected to match the barrel configuration of each 85TSS model.


Note: Shotguns may only be ordered by a dealer with a valid Federal Firearms License and not be ordered online.